SSB2 Swelling Sealing Bag

Swelling fleece coating for Telecommunication cables

The universal sealing system for cable ducts and
service entries in the telecommunications sector.

For duct ID Ø 40 - 150 mm.

Reusable once.

General information

The Swelling Sealing Bag (Patent PCT/EP 2017 065542, EP 16177469) is a further develop-ment of the sealing cushion/valve (Fibre Optics CT Patent EP 15 154700.7), in use very successfully since 2006 and characterised by easy installation and removal as well as reusability. The Wolf Swelling Sealing Bag sealing fulfils the requirements of T-Com TS 0307/96.

The leak rate (diffusion rate) of the Wolf sealing elements is far less than that demanded by T-Com and far less than the leak rate of competitor products. Wolf sealing elements provide the user with a durable, reliable seal in a temperature range of -15 °C to +30 °C (4 h at 45°C for a short period).

The Swelling Sealing Bag has been developed as a product that can be reused once, in contrast to the Wolf valve sealing elements, which can be inflated 4 times in total.

The packaging units for Swelling Sealing Bags contain 100 units.

Product description:

Sealing cushion materials:
The flat tube cushion is made of a five-layered aluminium laminate.The high quality of both material and processing guaranteesa very low diffusion/leak rate
of ~0.73 mbarl/year and ensures a long service life.

 

The filling unit:
The plastic filling tube is welded to the flat tubular cushion by means ofa special heat-sealing process (patent applied for). The pressure filling is carried out via a filling adapter (19.1 SSB-A), which is attached to the filling tube before inflation. After inflation, the filling tube is pressure-sealed by means of a crimp sleeve and the original Wolf crimp tool.Type SSB2-L can be reused once (i.e. is inflatable twice in total).

Product properties:

Seals against dust,water (up to 5 m water column) and chemical mixtures

 

The high-quality, robust aluminium laminate ...

  • adapts flexibly to the sealing areaindependently of
    cable diameter and configuration or contamination by dirt
     
  • ensures a long service life
     
  • is resistant to chemical mixtures pH2 to pH12, fuels etc.


Coated with swelling material, product groupWO 22.2 QV-DBK ...

  • ensures tightness up to 0.5 bar/ 5 m water column immediately on contact with water
  • makes removalquickandeasy (≤ 2 min). No adhesion!


The PE inflation tubeand crimp sleeve technology ...

  • makeinflation with compressed air simple (CO2-free!)
  • simple joint technology, ideal for on-site operation

Installation Video:

Test certificates:

Wolf GmbH

Zazenhäuser Straße 52
D - 70437 Stuttgart

Tel.:  +49 (0)711 87 39 41
Fax.: +49 (0)711 87 12 30

Email: Service(at)Wolf-Systems.com