Quick-curing casting resin (potting compound)

EP 5612 & PUR 5711 Casting resin

Quick-curing casting resin (potting compound)

Accessories for cables and connecting elements

For cap-sealing connection elements in work areas, storage places and route installations
For injecting into high-tensile-strength cable cores

General product information:

The resin component and the hardener bond soon after mixing and adhere to a wide variety of surfaces.

Advantages:

● time-saving method

● easy to use

● efficient

● safe and clean

● economical

● ready for immediate use anywhere

Only three steps to obtain
perfect 2-component mixture:

Attach the mixer to the cartridge.
Peel back the cartridge sea
l and place the cartridge in the gun.
Pump ... and ready!
Both components are now adequately
mixed and in the right proportion

Leftover resin can be reused, even weeks later.
A new mixer is all that is needed.

Product description:

PUR 5711

is a solvent-free, low-viscosity 2-component adhesive. It is polyurethan-based and has particularly high adhesive strength for gluing metals, including light and non-ferrous metals, paper, cardboard and wood. Bonds metal with plastic.

EP 5612

is a solvent-free, low-viscosity 2-component adhesive. It is epoxide-resin based. Due to its low viscosity it can be used as both adhesive and casting agent.

Product range:

Prod. No.

Contents per packing unit

[P.U.]

35.2 EP5612

4 x double cartridges EP5612 of 400 ml

(comp. A: 320 ml/comp. B: 80 ml)

35.2 PUR5711

4 x double cartridges EP5612 of 400 ml

(comp. A: 320 ml/comp. B: 80 ml)

Accessories:

Prod. No.

Contents per packing unit

[P.U.]

35.3-900072

Manuel cartridge dispensing gun 4:1

for 400 ml double cartridges

35.3-900072

Pneumatic double cartridges 4:1

for 400 ml double cartridges

Technical Data:

Properties	Standard	EP 5612 ⁽¹⁾	PUR 5711
Viscosity (Comp. A/B)	DIN EN ISO 3219	7,5/3,7 Pas	26/0,13 Pas
Density (Comp. A/B)	DIN 53479	1,1/1,1 g/cm³	1,26/1,23 g/cm³
Mixing proportion (Comp. A/B)	gravimetric volumetric	80/20 (parts by weight) 4/1 (parts by volume)	80/20 (parts by weight) 4/1 (parts by volume)
Colour of the mixture		transparent-yellowish	brown
Solid content		100 %	100 %
Pot life	DIN VDE 0291-2	20-30 min	45 min
Storage	12 months if kept in the original (closed) containers and stored in a dry and cool place (Ideal storage temperature: 5 °C)
Hardening time time until hard to the touch time until fully hardened	-	2 h	45 min * 2 h
Curing conditions/ Contact pressure	-	> 5 °C no contact pressure required, only fix	> 5 °C no contact pressure required, only fix
Shorehardness A	DIN 53505	92	-
Adhesive strength in the shear tension test Steel to steel (blasted SA2,5) Wood to wood Glass to glass PA6/PA6	DIN EN 1465	19 N/mm² 10,8 N/mm² 4,4 N/mm² 0,9 N/mm²	9 N/mm² 7,2 N/mm² 1,4 N/mm² 4,7 N/mm²
Temperature resistance	-	-20 °C to + 120 °C	-20 °C to + 100 °C

Properties	Standard	EP 5612 ⁽¹⁾	PUR 5711
Water absorption 20 °C / 1 day 20 °C / 2 days 20 °C / 7 days 20 °C / 14 days 20 °C / 21 days 20 °C / 30 days 100 °C / 30 minutes	ISO 62	+ 0,13 % + 0,26 % + 0,50 % + 0,79 % + 0,93 % + 1,13 % + 0,73 %	+ 0,13 % + 0,20 % + 0,33 % + 0,52 % + 0,65 % + 0,72 % + 0,31 %
Chemical resistance	-	alkali, fuel, grease, cooling lubricants, water	oil, fuel, grease
Insulation resistance (layer thickness 2 mm)	DIN IEC 60167
Volume resistance (layer thickness 2 mm)	DIN IEC 60093	10¹⁰ – m5 * 10¹² Ω

Note:

* As the resin will harden in the mixer after this time, the mixer must be replaced.

⁽¹⁾ Status 09/2017

Installation:

Only three steps to obtain a perfect 2-component mixture:

1. Attach the mixer to the cartridge.

2. Peel back the cartridge seal and place the cartridge in the gun.

3. ... Pump ... and ready!

Both components are now adequately mixed and in the right proportion

Leftover resin can be reused, even weeks later. A new mixer is all that is needed.

Important

Harmfull if swallowed.

Causes burns. May cause sensitisation by skin contact.

Avoid contact with skin. In case of contact with eyes rinse immediately with plenty of water and seek medical advice.

Wear suitable protecting clothes. In case of accident or if you feel unwell seek medical advice immediately.

Use only in well ventilated areas!