Sealing cushions for bridge supports, supporting structures or slatted structures
- Sealing cushions LLA | SSA, consisting of:
2 sealing cushions (LA | SA) for gluing together on-site
- Prevent the passage of water,
- Reusable (can be filled 4 times)
- Type L for joint widths of 2 to 6 cm
- Type S for joint widths of 3 to 13 cm
63.11 QADK/V LA/SA
Cushion 1
- Swelling material on both sides,
4.2 mm thick (480 g/cm²)
- "Pull-in" attachment
(swelling material) at both ends
- Installation not possible in
standing or flowing water!
- Tight immediately on
contact with water.
62.12 QADK/V LA/ SA
Cushion 2
- Swelling material on one side,
4.2 mm thick (480 g/cm²)
- BSK glue strip 1 x 50 mm on one side
- Installation not possible
in standing or flowing water!
- Tight immediately on
contact with water.
65.11 ZKADK/V LA/SA
Cushion 1
- Cellular rubber on both sides
Thickness 6 mm (Art. No. 65.1)
Thickness 10 mm (Art. No. 65.2)
- "Pull-in" attachment
(swelling material)
at both ends
- Suitable for Installation in
standing or flowing water.
62.12 QADK/V LA/ SA
Cushion 2
- Cellular rubber on one side
Thickness 6 mm (Art. No. 65.1)
Thickness 10 mm (Art. No. 65.2)
- BSK adhesive tape on one side,
1 x 50mm
- Suitable for Installation
in standing or flowing water.
